User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Eagle Flex Timers
DATE:                  11-Aug-95
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       3
NUMBER OF LINES:       70
STANDARD:              STAND STD-11-2
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON

# Equipment #Various          Type: Eagle Flex Timers
# Notes: This is a data only procedure. Use paper procedure and return to the
#        lab to run this procedure.
#
# Review Approval:_____________________________ Release Date:____/___/____


  1.001  ASK+                                      M   X
  1.002  ASK-   R     N              P                            F        W
  1.003  RSLT         =Accuracy:ñ30 seconds Repeatability ñ18 seconds.
  1.004  RSLT         =
  1.005  RSLT         =Reference Documents:None
  1.006  RSLT         =
  1.007  STD          STAND STD-11-2
  1.008  DISP         Install the UUT into the XP500 Universal Excalibar
  1.008  DISP         RMS Jammer Special External Test fixture.
  1.009  DISP         POWER up the UUT and allow it to warm up.
  1.010  HEAD         {Repeatability Test}
  1.011  DISP         This is RUN 1
  1.011  DISP
  1.011  DISP         Set the UUT to time out 300 sec (5 MIN) and START.
  1.012  MEMI         Enter the STANDARD time @ UUT set for 300 SEC
  1.013  MEME                                                     >1
  1.014  DISP         This is RUN 2
  1.014  DISP
  1.014  DISP         DO NOT change the UUT setting and repeat.
#  1.015  ACC          0.00sec        0.1U
  1.015  MEMI         Enter the STANDARD time @ UUT set for 300 SEC
  1.016  MEME                                                     >2
  1.017  MATH         mem=m[1]-m[2]
  1.018  MEMC         0.00sec        18U
#!          Test Tol 18, Sys Tol 0.1, TUR 180.0000 (>= 4.00).

  2.001  HEAD         {Range 0-60 min Range}
  2.002  DISP         Set the UUT to time out 20 minutes and START.
#  2.003  ACC          1200sec        1U
  2.003  MEMI         Enter the STANDARD time @ UUT=1200 seconds.
  2.004  MEMC         1200sec        30U
#!          Test Tol 30, Sys Tol 1, TUR 30.0000 (>= 4.00).


  3.001  HEAD
  3.002  DISP
  3.002  DISP         ÿ                   P R O C E D U R E
  3.002  DISP         ÿ     ÿ                COMPLETED!
  3.002  DISP






#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.